top of page
Welcome! See our ever growing building blog below.
Main Instruction Pages:
Robareeno
3 min read
The Fokker DR1 3D Printed Plane Instruction Blog
This is the ever expanding construction manual for our new Fokker DR1 airplane. Table of Contents: Required Parts List: Fokker DR1...
Robareeno
1 min read
The Spray Jetboat Building Blog How to assemble a 3D printed boat.
Find out how to print and build this awesome 3D printed Jetboat. Table of Contents: The Spray Jetboat hardware list: Build Plate Size for...
Robareeno
1 min read
The Jetwing flying wing construction Manual.
This is the main construction manual for the Jetwing EDF flying wing Jet
Robareeno
2 min read
The Pitts Special 48" Edition Table of Contents
This is the construction blog for the bigger version of the Pitts. Required Parts List: Pitts Printer Settings: Model Plans: Printing The...
Robareeno
2 min read
MINI Extra 300 Main Construction Blog.
What is this thing? How do I build it? Introduction: The free mini Extra 300 has been a big hit, and we now have hundreds of downloads...
Robareeno
1 min read
"The Big Brother" Extra 300 Profile Plane Instructions
Well, we now have two versions of this plane, and they are quite different. Here you will find the printing instructions for the bigger...
Robareeno
1 min read
Free Mini Extra 300 Profile Version Construction Blog
Here you will find everything related to the construction of the Extra 300 Profile plane: Table of Contents: Model description,...
Robareeno
1 min read
Pitts Special Biplane Build Instructions.
This is the ever expanding building blog for the Redbaron RC Pitts. Table of Contents: Print Settings: Printing the Fuselage Printing...
See All other posts below
Search
Robareeno
Sep 13, 20212 min read
Creality 10S Pro Linear Rail Upgrade Instructions.
We've put some miles on the 10s Pro. It was time to make it better. Here's how we did it. In the pic above, you are seeing a bondtech...
159 views
Robareeno
Jan 28, 20213 min read
Creality 10 s Pro upgrades that I have made to make this machine awesome!
Up to a couple years ago, my experience with 3D printing was quite limited. My career has been 3D modeling and design, however, so I was...
45 views
bottom of page