top of page
Welcome! See our ever growing building blog below.
Main Instruction Pages:

The Fokker DR1 3D Printed Plane Instruction Blog
This is the ever expanding construction manual for our new Fokker DR1 airplane. Table of Contents: Required Parts List: Fokker DR1...
Robareeno
3 min read

The Spray Jetboat Building Blog How to assemble a 3D printed boat.
Find out how to print and build this awesome 3D printed Jetboat. Table of Contents: The Spray Jetboat hardware list: Build Plate Size for...
Robareeno
1 min read


The Jetwing flying wing construction Manual.
This is the main construction manual for the Jetwing EDF flying wing Jet
Robareeno
1 min read


The Pitts Special 48" Edition Table of Contents
This is the construction blog for the bigger version of the Pitts. Required Parts List: Pitts Printer Settings: Model Plans: Printing The...
Robareeno
2 min read


MINI Extra 300 Main Construction Blog.
What is this thing? How do I build it? Introduction: The free mini Extra 300 has been a big hit, and we now have hundreds of downloads...
Robareeno
2 min read

"The Big Brother" Extra 300 Profile Plane Instructions
Well, we now have two versions of this plane, and they are quite different. Here you will find the printing instructions for the bigger...
Robareeno
1 min read

Free Mini Extra 300 Profile Version Construction Blog
Here you will find everything related to the construction of the Extra 300 Profile plane: Table of Contents: Model description,...
Robareeno
1 min read


Pitts Special Biplane Build Instructions.
This is the ever expanding building blog for the Redbaron RC Pitts. Table of Contents: Print Settings: Printing the Fuselage Printing...
Robareeno
1 min read
See All other posts below
Search

Wing Struts:
Printing and assembly of the Fokker DR1 Wing Struts. Printing: All of the struts need to be printed using 100 percent infill. Standard...
Robareeno
Jan 5, 20222 min read
445 views

Weight and Balance
Why it's important: You are almost ready to fly, but in order to fly well, you need a proper center of gravity. In my experience, 3D...
Robareeno
Nov 16, 20213 min read
270 views

Installing the Electronics
Servo, Receiver, ESC, and Battery Installation. Rudder and Elevator Configuration: Rotate the model upside down with the lower wing...
Robareeno
Nov 15, 20213 min read
390 views

The Lower Wing
Wing Attach Fittings: Printing and assembly of the lower wing of the Fokker DR1 Print 1 copy of the "wingattachoutboardlowerright.stl...
Robareeno
Nov 15, 20211 min read
673 views


Printing the Cowling
Instructions for Printing and installing the Cowling. Print settings: This part is not a single wall print. Material: LW PLA We have best...
Robareeno
Nov 15, 20211 min read
332 views


The Fokker DR1 Dummy Motor
Printing and assembly of the dummy motor. She's gorgeous but not exactly to scale. She's scale enough to look convincing under the...
Robareeno
Nov 11, 20211 min read
373 views
bottom of page