Right Upper Wing:
Print Setting: LightweightPLA thinwall. Click link for description.
print orientation: see below pic.
Right Upper Wingtip:
Print Setting: LightweightPLA thinwall. Click link for description.
Left Upper Wing:
Print Setting: LightweightPLA thinwall. Click link for description.
All wing panels can be reversed in the Cura slicing software so that the right hand panels can be printed as left hand panels and vice versa. If you are unsure how to do this, see my video post here:
Upper Wing Center Section:
Print Setting: LightweightPLA thinwall. Click link for description.
Upper Wing Struts:
Upper Wing Spar:
Lower Wing Root:
Print Setting: LightweightPLA thinwall. Click link for description.
Lower Wing Right:
Print Setting: LightweightPLA thinwall. Click link for description.
Lower Wing Right Wingtip:
Print Setting: LightweightPLA thinwall. Click link for description.
Lower Wing Right Aileron:
Print Setting: LightweightPLA thinwall. Click link for description.
Lower Wing Aileron control Horns:
Lower Left Wing:
Print Setting: LightweightPLA thinwall. Click link for description.
All wing panels can be reversed in the Cura slicing software so that the right hand panels can be printed as left hand panels and vice versa. If you are unsure how to do this, see my video post here:
The Completed Pitts:
That is it for the wings! Check the main blog here for the next steps. Feel free to reach out to us with any questions. We will attempt to clarify the construction blog including your input as much as possible.
Comments